基于力约束的空心涡轮叶片陶芯定位方法

精铸蜡型作为空心涡轮叶片精铸过程重要的前期工艺转接件,其壁厚精度主要由蜡型模具型腔与内部陶芯的位置匹配关系决定。由于陶芯在模具内完全依靠定位元件实现空间定位,为减小由定位误差引起的陶芯位姿漂移,提出了一种基于力平衡约束的空心涡轮叶片精铸模具陶芯定位布局优化方法。首先,通过建立陶芯定位误差传递模型,揭示了定位误差与陶芯空间位姿扰动量之间的映射关系;其次,根据力平衡原理构建了基于力约束的陶芯定位布局优化模型;之后,针对陶芯表面定位候选点的离散分布特性,结合遗传算法给出了陶芯定位布局点的详细求解策略。最后,仿真对比证明了利用本文所提方法获得的陶芯定位方案可以在保证陶芯定位稳定性的同时提高陶芯定位精度,此外,按照优化后的定位方案压制实际蜡型,壁厚检测结果也进一步表明所提方法的有效性。     

某型飞机机翼整体油箱工艺研究

介绍了某型机机翼整体油箱的研制过程,针对总体气动、结构和使用维护等对整体油箱提出的性能要求,工程部门相应采用严格的环境措施、确保协调精度的预装配措施以及湿连接、密封装配措施等,解决了研制过程中诸多关键难题,保证了整体油箱的研制进度和产品质量,经各种试验检测和试飞考核,该整体油箱质量稳定可靠,性能良好。     

水下运载体导航技术

本文第一部分综合了国外近几十年根据不同需求形成的多种水下导航技术,论述了面上导航信息利用水声技术向水下转化的多种形式以及利用不同地球物理参数与地理位置相关性导航的各自特点与问题,论述了在测绘海底地形、重力与其它地球物理特性及其变化时在传感器层面和任务层面融而为一所形成的独具水下特色的同步定位与建图(Simultaneous Localization and Mapping,SLAM)导航技术,论述了NavLab作为一个通用工具软件在水下导航系统研发、精度分析以及作业前导航功能规划和导航信息事后处理方面的独特作用。本文第二部分以极具代表性的挪威HUGIN AUV系列产品军民两用为实例,根据任务和导航功能需求,从其“导航工具箱”(ToolBox)选择适用手段,给出典型任务对应的导航方式和传感器。文章结束部分给出了基于先进人工智能技术的未来展望。     

基于实测数据的疲劳寿命分散系数取值研究

随着基准谱、严重谱编制研究的深入,利用实测数据编制载荷谱在编谱方法和分散系数取值等方面需 求愈发迫切。从正态概率分布理论出发,讨论影响疲劳寿命分散系数取值的主要因素;针对基准谱和严重谱之 间的差异性,提出基准谱和严重谱的折算思路和方法,并通过实测数据编制的基准谱和严重谱折算系数进行比 较分析。结果表明：采用本文方法可以实现基准谱与严重谱之间损伤分散系数的折算取值。     

New design simulation for a high-altitude dual-balloon system to extend lifetime and improve floating performance

This paper presents a comprehensive simulation for a high-altitude dual-balloon system which consists of zero- and super-pressure balloons. Preliminary calculations were established to describe the basic concept of the new integrated system. A mathematical model was investigated to simulate the ascending and floating processes which considered the atmospheric conditions and thermodynamic variations. Based on the simulation, results showed that the floating altitude stability between daytime and nighttime was improved. This integrated system supports higher floating altitude levels than those of ordinary balloons and extends the lifetime of floating balloon systems. Moreover, results demonstrated that the integrated system was lighter than ordinary balloons, saving useful weight for effective payload. Furthermore, exploiting the advantages of both kinds of balloons while avoiding the difficulties was a significant goal in the current design to promote the floating performance of high-altitude balloons technology.     

运动单站干涉仪相位差直接定位方法

针对传统干涉仪测向定位在低信噪比(SNR)下性能降低、多频段系统复杂等缺点,本文直接利用运动单站干涉仪模糊相位差(PD)实现对地面静止辐射源定位.为解决该定位问题,结合干涉仪相位差的几何特性,提出了一种多角度距离参数化高斯和滤波(MB-RP-GMF)定位解算方法,利用相位差误差检测获得多个初始方位角,通过距离参数化得到一组滤波初始值,采用扩展卡尔曼滤波(EKF)进行定位计算.仿真结果表明,该定位方法在低信噪比下优于仅测向(BO)定位,且仅采用一组干涉仪便可对多个频段辐射源进行定位.     

应用ZigBee技术的航天器内部三维空间定位方案

针对航天器内部缺少三维空间定位方案的问题,提出一种应用紫蜂(ZigBee)技术的无线传感器网络定位方案,即通过在航天器内部布置ZigBee无线传感器网络,设置若干数量的参考节点和未知节点,利用参考节点的先验位置信息,以及针对未知节点的测距信息,完成对未知节点的三维空间定位。建立基于参考节点平面的三维空间坐标系,根据到达角度(AOA)计算出未知节点的法向坐标(Z坐标),将未知节点投影至参考节点所在平面(XOY平面),利用三边定位法计算出未知节点在XOY平面的坐标。该方案理论上最少只需要6个参考节点,就可以实现对航天器内部未知节点的定位,并且不需要时间同步,适合于无线传感器网络的低复杂度设计需求;利用到达时间差(TDOA)算法进行AOA计算,通过对参考节点进行分层布局,避免使用复杂的天线阵列技术。仿真验证结果表明:本文方案具有较高的定位精度,同时具有较低的硬件和组网要求,以及较低的计算和通信开销,适合于航天器内部的三维空间定位。     

基于混合特征匹配的微惯性/激光雷达组合导航方法

微惯性/激光雷达(MEMS IMU/LADAR)组合导航系统在室内应用时,由于室内结构化环境下环境特征(如点和线段)分布稀疏,传统的单一特征匹配算法存在观测盲区,易造成导航定位参数估计误差大的问题。基于此,研究了激光雷达自适应数据分割方法的点和线段的特征提取算法,提出了基于混合特征匹配观测模型的MEMS IMU/LADR扩展卡尔曼滤波(EKF)算法。同时,设计了MEMS IMU/LADR组合导航试验样机,在室内环境下通过试验对滤波算法进行了验证。结果表明:提出的算法在室内结构化环境下相比传统单一点或线特征匹配组合定位算法的定位精度可提高60%,对于小型旋翼无人飞行器在室内结构化环境中的高精度定位具有较高的参考意义。     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.